|
Admin Panel
> Configuration > Default
Rules
Default Rules
Default Space to allot to users
Here you can set the value of the default
storage space to assign to a new registered user. You must
assign value in Megabytes (MB). If you wish to give a value
in kilobytes (KB), you can do so by assigning a value in fractions,
e.g. 0.5 (will assign a value of 500 KB). Anything beyond
500 kb will be disallowed to the user and an error message
with the buy-link will
be present to the user for further details.
Tip: The user's calcuation of space
used is based on the Space
Calculation Scheme selected.
Note: You can change user-specific settings of user's
storage limit in the User
Management Panel
Refer Call: $Config_default_space
Default Media Limit to allot
Here you can set the value of the default
photo limit to assign to a new registered user. You must assign
a integer value, e.g. 2, 10, etc, not in fractions.
If a value of 10 is assigned a user will not be allowed to
add photos to his/her albums over 10 photos, an error message
with the buy-link will
be present to the user for further details.
Note: You can change user-specific
settings of user's photo limit in the User
Management Panel
Refer Call: $Config_default_photo
Default Album Limit to allot
The default album limit to assign to a new
registered user. You must assign a integer value, e.g. 2,
10, etc, not in fractions.
If a value of 10 is assigned a user will not be allowed to
add new albums after 10 albums have been made, an error message
with the buy-link will
be present to the user for further details.
Note: You can change user-specific
settings of user's album limit in the User
Management Panel
Refer
Call: $Config_default_album
Default Reminders Limit to allot
The default reminders lmit to assign to a
new registered user. You must assign a integer value, e.g.
2, 10, etc, not in fractions.
If a value of 10 is assigned a user will not be allowed to
add new reminders sfter 10 reminders have been made, an error
message with the buy-link
will be present to the user for further details.
Reminders used are calcuated of the number
of currently pending reminders. Expired reminders are not
taken into account of calculation.
Note: You can change user-specific
settings of user's reminder limit in the User
Management Panel
Refer
Call: $Config_default_remind
Default Prefs flags
Preferences column contains small identifiers named FLAGS,
each of letter depicts a type of indication of the user's
customisation, access and other values. These are case-sensitive
and you should take care while editing them manually. The
current flags understood by Albinator are:
| L (uppercase) |
Listing of Public Albums
only |
| l (lowecase) |
Listing of All Albums |
|
To remove listing at all
remove L from the table (upper and lower none should be
there) |
| B |
Border with thumbnails and full images |
| M |
Has manipulate access |
| R |
Has reminder access to
monthly reminders |
| E |
No email show in the user profile |
| |
To show email remove E from prefs |
Note: You can change user-specific
settings of user's preferences in the User
Management Panel
Refer
Call: $Config_dprefs
Default User Validity
You you can set a default time period e.g.
1 week for all new registered users, a value e.g. 7 will provide
access to the user for 1 week of his/her registration date.
You can use this as a demo account, you can provide any number
of days for default validity, e.g. for 1 year = 365. These
settings are updated when user purchases a certin user group
from your store with pre-defined validity. In case the user
had a validity date till 1st June 2004 and he/she purchases
a membership with 1 month's validity then the validity time
will be update to 1st July 2004. This is done to allow you
to sell Renew membership offers before the actually membership
expires.
Note: You can change user-specific
settings of user's validity date in the User
Management Panel
Refer
Call: $Config_default_uvalid
Default Watermark rule for new users
You you can set a default option for insertion
of watermarks for the new users. This means if a new user
is registered and when they upload photos, they will be watermarked.
AS watermark settings can be set to user-specific you can
change this setting from the User
Management Panel for the certain users. This option was
given to omit administrators/moderatores or ther special users
from the watermark process.
Note: Once the watermark is applied
to a photo, it can't be removed.
Refer
Call: $Config_default_watermark
Language Settings
As Albinator supports multiple languages,
this panel allows you to add/delete language packs, set default
values, etc.
Setting Default Settings:
The default language selected will be used when the user
is not logged, e.g. showing albums, default pages, login,
registeration, etc.
If you select force checkbox it will force the language
settings irrespective of the user's language settings. The
option to change language pack from user's settings panel
will be removed, also no option to select prefered language
at time of registeration will also be removed.
Note: You can change user-specific settings of user's
validity date in the User
Management Panel
Adding/Deleting Language Packs: (following panel pops-up
when you click on edit)
Every new languages have the following files, therefore when
you download news from your Customer
Panel you must place them in right directories:
- Cascading Style Sheet (place it in albinator_dir/essential/style)
- Language Files (place it in albinator_dir/essential/language/)
- ID_lang.php
- ID_adminlang.php
- Images Directory (place it in albinator_dir/templates/THEMES/images_directory)
- ID_headers & sub directories
Now just visit your Admin Panel >
Configuration > Default
Rules > Language Settings, click on add, the
following form will popup,
You know just need to provide the ID and
name of the language pack, give the pack a name to be displayed.
e.g. spanish version has an ID of esp and the name
can be give Spanish or Espaņol or anything else.
The way to find out what the ID of the language
pack is to see the first 3 letters of your files, e.g. the
spanish language pack has name of esp_headers for the
images directory, therefore the ID is esp.
Caution: While adding a new name you
should not use either + or | signs in it.
Refer
Call:
- Default Language: $Config_langCode
- Language Code list:
$Config_list_langCode
- Language Forcer
(1 for yes): $Config_langCodeForce
Default Theme
You you can set a default theme of the system.
You can also force it, then no user will be given options
to change it.
Note: You can change user-specific
settings of user's in the User
Management Panel
Refer
Call: $Config_default_theme
Default User Group
You you can set a default user group for
the new users. This way you can sell higher resource groups
from the store, yet giving all new users a taste of the system
by making a free usergroup default all new users.
Note: You can change user-specific
settings of user's in the User
Management Panel
Refer
Call: $Config_default_usergroup
Default Profile System
If you are integrating with vbulletin or
phpbb or anyother known forum system, you can select to link
the forum profile when Albinator user profile is called.
Refer
Call: $Config_default_profile
Default Slideshow type
Two options,
- Show All in one (uses javascript for high bandwidth users)
- Show Page by Page
Refer
Call: $Config_preloadSlideShow
Options on the Adminstration Panel are:
Configuration & Customization
Adding Account
All other admin options are pretty self explanatory or with explanation's besides them.
|
